Accu-Finish |
|---|
FINISH Use the Accu-Finish machine to put the EXACT geometry and finish required for the job. If a ìmirrorî finish is required on the part, you need a ìmirrorî finish on the tool... with Accu-Finish you can do it in seconds. The ìNO HEATî diamond wheels will extend tool life and grind tools to "BETTER" than new. |
|---|
001-823 Accu-Finish
Floor Cabinet $448
This heavy steel cabinet turns your Accu-Finish Series II into an organized sharpening center. Perfect working height. Has holes for permanent floor mounting. (See mounting plate below as mounting option). Includes a special kit to bolt Series II to the cabinet top. Built in storage slots for wheels and other accessories. approx. shipping wt. 69 lbs., shipped UPS in 1 boxes.
001-890 Cabinet Floor
Mounting Plate $99
This Accu-Finish mounting plate allows you to add stability and safety without permanently mounting the cabinet to the floor. Adjustable leveling bolts compensate for unlevel floors. Solid steel construction. Complete with mounting hardware. approx. shipping wt. 30 lbs.
Protractor Extension Arm $44
Lets you set more tool angles. The Accu-Finish table protractor goes to 75 degrees. At times you need angles greater than these. This extension arm clamps onto the tool guide and gives you a 90 degrees offset that lets you set all the angles. Machined from solid steel.
Touch-up carbide, HHS and other tools right on the machine. Recommended for lightly honing lands on new or resharpened tools.
001-714 360 & 600 Grit $29
001-779 2 ea 600 Grit $29
The wash-off hand protection.
Give your hands convenient protection from dirt and grime. Rub pr88 onto your hands before dirty jobs.
After youíre done, watch even the toughest dirt leave as you wash. Non-toxic product that is kind to your skin with no oily feel. Even works on printer's ink and automotive grease. About 600 hand treatments. 1 Liter (33.8 oz)
Triplet 10X 18mm lens. Chrome with leather case. A must for close inspection of tools and work.
Optivisor
Helps you see your work better. It features ground lenses and adjustable headband. Includes special kit for changing lens position.
002-710 #3 (1.75 power) $39.95
002-711 #5 (2.50 power) $39.95
002-712 #7 (2.75 power) $39.95
This optiloupe kit adds an extra 2.5 power to your Optivisor. Swings away when desired.
022-119 Optiloupe Kit $12.95
Built-in lens magnifies your work. Flexible-neck adds light and vision where you need it. Improve the quality of your sharpening and reduce eye strain. Includes clamp-on mount and 40W bulb.
for Accu-Finish Series II machine and other applications
Extra heavy-duty, UL listed lamp has 24" flexible neck that is sealed against oil and grit. So, this lamp stays where you put it. Quick-mount bracket for easy installation. Rated to a bright 100 watts to give plenty of work light. Insulated shade stays cool. 115 Volt, 3-prong grounded plug.
for Accu-Finish Series ONE machine and other applications. Same heavy-duty construction as the lamp above, only smaller. UL listed lamp has 15" flexible neck that is sealed against oil and grit. Lamp stays where you put it. A hex ferrule with lock nut and washer for easy ìpanelî mounting. Insulated shade stays cool. Rated to 40 watts. 115 Volt, 3-prong grounded plug.
Turn the machine on and off with both hands free. Especially useful for horizontal lapping. Comes prewired for standard 3-wire, 115 Volt grounded outlet. UL listed to 1/2 HP.
The better you can see, the better the results!
This microscope system is unique because you can both inspect and work under it. This difference is critical. The large focal length gives you plenty of distance under the microscope for hand tools, power tools, measuring and gauging tools, etc. Work is done with absolute clarity and precision without eye fatigue.
Includes Meiji Microscope, Stand and Headrest. Steel construction for stable support. Height is easily adjusted from 2.5" (63.5mm) to 19.5" (495mm). Horizontal arms travel 11" (279mm) allowing exact positioning of the scope above the workpiece. (Does NOT include Twin Halogen Lamp Kit shown in photo)
The Flex-Arm stand offers the quickest inspection set-up for items that vary in size or shape. Includes Meiji Microscope, Flex Arm ìAcrobatî Stand, Headrest and Base. All steel construction. Arms can be locked ridged or left flexible. Arm reach: 30" (762mm) Height: 24.5" (622mm)
Twin Halogen Lamp Kit
(shown on 003-600 Inspection Stand above)
Includes 2 halogen work lamps and mounting bracket for attachment to the microscope stand. Lamp locks in position or can move side-to-side with microscope.
003-595 120V/60Hz $398
003-596 240V/50Hz $448
Microscope Ring Light
Glare and shadow free, uniform illumination. Circular fluorescent bulb
with 7000 hours of lamp life. Highly recommended for the "Flex Arm"
stand.
022-268T 120 V $179
022-268T-220 220/240 V, 50/60 Hz $179
022-286 Replacement Ring Bulb $46.50
Copyright 2004 Glendo Corporation. All rights reserved.
INTERNATIONAL CUSTOMERS: All prices are in US Dollars.
They do not include exchange rate differentials or fees, customs duties, VAT or other country taxes,
import fees, shipping or forwarding costs relative to orders going to countries outside the USA.
Contact Glendo
